Authentication Settings

Logon to  the NetMotion Mobility Server


Click on Configure>Authetication Settings






Option - You may set up a separate authentication profile or use the global settings.


To create a separate Profile simply click New on the top left and give the profile a name, at the prompt.

You can then select the profile you wish to use, here.









There are three settings that need to be applied.  The settings are found in the middle pane.

SectionOption
AuthenticationProtocol
RADIUS: User AuthenticationRetransmit Interval
RADIUS: User AuthenticationServers







Click on Protocol 


Select RADIUS - EAP (PEAP and EAP-TLS)


Click Apply  






Select Retransmit Interval (under 'User Authentication')


Enter an interval long enough for a user’s mobile device to receive and respond to authentication requests. Recommended: at least 40000 milliseconds.



 



Click on Servers (under 'User Authentication')


Click the Add button







In the RADIUS Server Entry, please enter the following information:

OptionValue
Host address:Enter the IP address of machine that your DualShield Radius Server was installed
Port:1812

Shared Secret:

&

Confirm Shared Secret:

The shared secret will match the one you created when Registering NetMotion as a RADIUS client

Click: OK






Client Settings



Click on Configure>Client Settings







Tick the box of the Radius Server you will be using and click Save below.






Server Settings

Add RADIUS Server

  1. In the main menu, “Configure | Authentication Settings ”
  2. Select "Global Authentication Settings" in the left pane
  3. Select “RADIUS: User Authentication - Servers” in the middle pane



  4. Click “Add” button in the right pane to add the DualShield Radius Server



  5. Enter the Dualshield Radius Server IP address, Port and Shared secret.
  6. Click "OK" button to save it

Set User Authentication Protocol to RADIUS EAP

  1. Select “Authentication: Protocol” in the middle pane



  2. Select “RADIUS - EAP (PEAP and EAP-TLS)”



  3. Click “Apply” to save it

Set RADIUS Retransmit Interval

  1. Select "RADIUS: User Authentication | Retransmit Interval" setting. 

  2. Enter an interval long enough for a user’s mobile device to receive and respond to authentication requests. Recommended: at least 40000 milliseconds.

  3. Click Apply.

Client Settings

Enable Always Prompt for User Credentials

  1. In the main menu, Select “Configure | Client Settings”
  2. Select "Global Client Settings" in the left pane
  3. Select “Logon | Always Prompt for User Credentials” in the middle pane



  4. Enable "Always prompt when connecting



  5. Click “Apply” to save it 

Set Connecting Dialog Duration

  1. Select "Connecting Dialog Duration" in the middle pane



  2. Change Wait time to 120 seconds



  3. Click "Apply" to save it