Logon to the NetMotion Mobility Server
Click on Configure>Authetication Settings
|
|
Select the custom Authentication Profile, e.g. DualShield MFA
There are three settings that need to be applied. The settings are found in the middle pane. | Section | Option |
|---|
| Authentication | Protocol | | RADIUS: User Authentication | Retransmit Interval | | RADIUS: User Authentication | Servers |
|
|
Click on Protocol
Select RADIUS - EAP (PEAP and EAP-TLS)
Click Apply |
|
Select Retransmit Interval (under 'User Authentication')
| Enter an interval long enough for a user’s mobile device to receive and respond to authentication requests. Recommended: at least 40000 milliseconds. |
|
Click on Servers (under 'User Authentication')
In the RADIUS Server Entry, please enter the following information: | Option | Value |
|---|
| Host address: | Enter the IP address of machine that your DualShield Radius Server was installed | | Port: | 1812 | Shared Secret: & Confirm Shared Secret: | The shared secret will match the one you created when Registering NetMotion as a RADIUS client |
Click: OK |
|
Client Settings
Click on Configure>Client Settings |
|
Option - You may apply the following settings to device or user groups or just apply globally. |
|
There are two settings that need to be applied. The settings are found in the middle pane under Logon | Section | Option |
|---|
| Logon | Always Prompt for User Credentials | | Logon | Connecting Dialog Duration |
|
|
Select the option Always Prompt for User Credentials
Enable Always prompt when connecting Click Apply |
|
Select the option Connecting Dialog Duration
Change Wait time to 120 seconds Click Apply |
|
Related Articles
