Server Configuration [NM-UA]

Server Settings

Add RADIUS Server

Login the NetMotion Moblity XE Console

1. In the main menu, “Configure | Authentication Settings ”
2. Select "Global Authentication Settings" in the left pane
3. Select “RADIUS: User Authentication - Servers” in the middle pane
   
   
   
   
4. Click “Add” button in the right pane to add the DualShield Radius Server
   
   
   
   
5. Enter the Dualshield Radius Server IP address, Port and Shared secret.
6. Click "OK" button to save it

Set User Authentication Protocol to RADIUS EAP

1. Select “Authentication: Protocol” in the middle pane
   
   
   
   
2. Select “RADIUS - EAP (PEAP and EAP-TLS)”
   
   
   
   
3. Click “Apply” to save it

Set RADIUS Retransmit Interval

1. Select "RADIUS: User Authentication | Retransmit Interval" setting. 

2. Enter an interval long enough for a user’s mobile device to receive and respond to authentication requests. Recommended: at least 40000 milliseconds.

   

3. Click Apply.

Client Settings

Enable Always Prompt for User Credentials

1. In the main menu, Select “Configure | Client Settings”
2. Select "Global Client Settings" in the left pane
3. Select “Logon | Always Prompt for User Credentials” in the middle pane
   
   
   
   
4. Enable "Always prompt when connecting
   
   
   
   
5. Click “Apply” to save it 

Set Connecting Dialog Duration

1. Select "Connecting Dialog Duration" in the middle pane
   
   
   
   
2. Change Wait time to 120 seconds
   
   
   
   
3. Click "Apply" to save it